Concrete Admixtures and Accessories
Cormix produces a range of concrete and shotcrete admixtures to meet the demands of todays concrete industry.
Cormix emphasis is on producing speciality admixtures with high performance to produce long lasting sustainable concrete structures .
These admixtures influence the properties of concrete both in the wet and hardened states such as setting times , workability , durability ,strength and watertightness .
CONCRETE ADMIXTURE
WATERPROOFING ADMIXTURES
DESIGNATION
DESCRIPTION
PRINCIPLE USES
COVERAGE / YIELD
TDS
CORMIX H2O STOP
A concrete admixture for permanent waterproofing & concrete corrosion protection by crystallization. In both liquid & power form.
For all types of waterproofing & concrete corrosion protection. Basements, water tanks, reservoirs, waste water plants, marine structures etc.
0.8-1.0 litre per 100 kg of total cementitious material. (Liquid) 0.8-1.0 kg per 100 kg of total cementitious material. (Powder)
CORMIX H2O STOP + CI
A concrete admixture for permanent waterproofing & concrete corrosion protection by crystallization. In both liquid & power form.In addition reinforcing steel is protected from corrosion by the addition of a corrosion inhibitor.
For all types of waterproofing & concrete corrosion protection. Basements, water tanks, roofs,reservoirs, waste water plants, marine structures etc.
0.8-1.0 litre per 100 kg of total cementitious material. (Liquid) 0.8-1.0 kg per 100 kg of total cementitious material. (Powder)
CORMIX W1
Retarding and plasticising waterproofer (ASTM C494, Type A and BSEN 934-2).
Integral waterproofer for water retaining structures etc.
0.2-0.5 litre per 100 kg of total cementitious material.
CORROSION INHIBITOR
CORMIX CI
Corrosion inhibiting concrete and mortar admixture.
Used in concrete in all areas where the reinforcement is in risk of corrosion.
0.6-1.2 litre / cubic metre depending on severity of corrosive environment.
ADMIXTURES FOR READY MIX CONCRETE
CORMIX R1
A liquid concrete retarding plasticiser which complies to ASTM C494, Type B&D and BSEN 934-2.
A retarder for R.M.C., infrastructure projects, long lasting control of slump loss, RCC etc.
0.2-0.5 litre per 100 kg of total cementitious material.
CORMIX P2
A ready to use set retarding & water reducing stabilizer used to control setting times of concrete or cement based grouts. Complies to ASTM C494, Type B and BSEN 934-2.
For use in large continuous pours, where cold joints are anticipated, in under water concreting, for hot weather concreting and in tunnel cavity grouting.
0.3-0.7 litre per 100 kg of total cementitious material.
CORMIX PC707
A new generation plasticizing admixture base on modified polycarboxylate polymer. Complies with ASTM C949, Type A&D and BSEN 934-2.
Used in ready mix concrete where high slump retention is required in hot weather conditions, where fines are high in concrete mix design, etc. It can be used with durable concrete containing fly ash, slag, micro silica, etc.
0.3-1.0 litre per 100 kg of total cementitious material.
CORMIX SP4
A versatile product specifically designed for producing free flowing concrete in hot climates. A substantial water reducing agent for promoting early and ultimate strengths. (ASTM C494, Type A, D&G and BSEN 934-2).
For ready mix concrete and large pours with long lasting slump retention.
0.5-2.0 litre per 100 kg of total cementitious material.
CONGROUT AID
A powder admixture used to produce non shrink concrete.
For all cementitious mixes where restrained expansion required. Improves flow, cohesiveness and prevents shrinkage.
5-10% by weight of cement.
CORMIX SF1
An ultrafine spherical, high performance super reactive pozzolanic mineral additive conforming to ASTM C1240 definitions.
For dense, durable, watertight & high strength concrete. Use in shotcrete to reduce rebound, decrease permeability and improve strengths.
2-15% by weight of cement.
CONAIR
A liquid air entraining agent for use in concrete and mortar mixes. Conair complies with ASTM C260-81 for air entraining admixtures.
It is used to improve the workability, cohesion, and durability of concrete and mortar by the entrainment of minute air bubbles of controlled size and spacing, uniformly distributed throughout the mix.
0.03-0.2 litre per 100 kg of total cementitious material.
ADMIXTURE FOR PRECAST CONCRETE
CORMIX SP1
A high performance Sodium Napthalene based superplasticiser. Complies with ASTM C494, Type A&F and BSEN 934-2.
For flowing concrete, precast and high strength concrete.
0.5-3.0 litre per 100 kg of total cementitious material.
CORMIX SP1/A
A highly effective water reducing superplasticizer, an extremely powerful deflocculating agent, it operates by dispersing cement in to its primary particles which dramatically increases the flow characteristics of the cement paste. Complies with ASTM C494 and EN 934-2 Table 7, Type A and F.
Used to produce flowing concrete with high early & ultimate strength or in the production of precast concrete that requires substantial water reductions and very high early strengths. Large cement saving possible in precast concrete.
1.0 – 3.0 litre per 100 kg of total cementitious material.
CORMIX SP1/B
A highly effective water reducing superplasticiser and an extremely powerful de-flocculating agent, it operates by dispersing cement in to its primary particles which dramatically increases the flow characteristics of the cement paste. Complies with ASTM Type A&F and BSEN 934-2.
For using both in precast concrete & R.M.C. applications. Uses include to produce flowing concrete in congested areas, slabs and foundations, large pours, beams, columns and precast elements.
0.5-3.0 litre per 100 kg of total cementitious material.
Concrete Admixture
DESIGNATION : CORMIX H2O STOP
DESCRIPTION : A concrete admixture for permanent waterproofing & concrete corrosion protection by crystallization. In both liquid & power form.
PRINCIPLE USES : For all types of waterproofing & concrete corrosion protection. Basements, water tanks, reservoirs, waste water plants, marine structures etc.
COVERAGE / YIELD : 0.8-1.0 litre per 100 kg of total cementitious material. (Liquid) 0.8-1.0 kg per 100 kg of total cementitious material. (Powder)
DESIGNATION : CORMIX H2O STOP + CI
DESCRIPTION : A concrete admixture for permanent waterproofing & concrete corrosion protection by crystallization. In both liquid & power form.In addition reinforcing steel is protected from corrosion by the addition of a corrosion inhibitor.
PRINCIPLE USES : For all types of waterproofing & concrete corrosion protection. Basements, water tanks, roofs,reservoirs, waste water plants, marine structures etc.
COVERAGE / YIELD : 0.8-1.0 litre per 100 kg of total cementitious material. (Liquid) 0.8-1.0 kg per 100 kg of total cementitious material. (Powder)
DESIGNATION : CORMIX W1
DESCRIPTION : Retarding and plasticising waterproofer (ASTM C494, Type A and BSEN 934-2).
PRINCIPLE USES : Integral waterproofer for water retaining structures etc.
COVERAGE / YIELD : 0.2-0.5 litre per 100 kg of total cementitious material.
DESIGNATION : CORMIX R1
DESCRIPTION : A liquid concrete retarding plasticiser which complies to ASTM C494, Type B&D and BSEN 934-2.
PRINCIPLE USES : A retarder for R.M.C., infrastructure projects, long lasting control of slump loss, RCC etc.
COVERAGE / YIELD : 0.2-0.5 litre per 100 kg of total cementitious material.
DESIGNATION : CORMIX P2
DESCRIPTION : A ready to use set retarding & water reducing stabilizer used to control setting times of concrete or cement based grouts. Complies to ASTM C494, Type B and BSEN 934-2.
PRINCIPLE USES : For use in large continuous pours, where cold joints are anticipated, in under water concreting, for hot weather concreting and in tunnel cavity grouting.
COVERAGE / YIELD : 0.3-0.7 litre per 100 kg of total cementitious material
DESIGNATION : CORMIX PC707
DESCRIPTION : A new generation plasticizing admixture base on modified polycarboxylate polymer. Complies with ASTM C949, Type A&D and BSEN 934-2.
PRINCIPLE USES : Used in ready mix concrete where high slump retention is required in hot weather conditions, where fines are high in concrete mix design, etc. It can be used with durable concrete containing fly ash, slag, micro silica, etc.
COVERAGE / YIELD : 0.3-1.0 litre per 100 kg of total cementitious material.
CORMIX SP4
DESCRIPTION : A versatile product specifically designed for producing free flowing concrete in hot climates. A substantial water reducing agent for promoting early and ultimate strengths. (ASTM C494, Type A, D&G and BSEN 934-2).
PRINCIPLE USES : For ready mix concrete and large pours with long lasting slump retention.
COVERAGE / YIELD : 0.5-2.0 litre per 100 kg of total cementitious material.
DESIGNATION : CONGROUT AID
DESCRIPTION : A powder admixture used to produce non shrink concrete.
PRINCIPLE USES : For all cementitious mixes where restrained expansion required. Improves flow, cohesiveness and prevents shrinkage.
COVERAGE / YIELD : 5-10% by weight of cement.
DESIGNATION : CORMIX SF1
DESCRIPTION : An ultrafine spherical, high performance super reactive pozzolanic mineral additive conforming to ASTM C1240 definitions.
PRINCIPLE USES : For dense, durable, watertight & high strength concrete. Use in shotcrete to reduce rebound, decrease permeability and improves strengths.
COVERAGE / YIELD : 2-15% by weight of cement.
DESIGNATION : CORMIX SP1
DESCRIPTION : A high performance Sodium Napthalene based superplasticiser. Complies with ASTM C494, Type A&F and BSEN 934-2.
PRINCIPLE USES : For flowing concrete, precast and high strength concrete.
COVERAGE / YIELD : 0.5-3.0 litre per 100 kg of total cementitious material.
DESIGNATION : CORMIX SP1/A
DESCRIPTION : A highly effective water reducing superplasticizer, an extremely powerful deflocculating agent, it operates by dispersing cement in to its primary particles which dramatically increases the flow characteristics of the cement paste. Complies with ASTM C494 and EN 934-2 Table 7, Type A and F.
PRINCIPLE USES : Used to produce flowing concrete with high early & ultimate strength or in the production of precast concrete that requires substantial water reductions and very high early strengths. Large cement saving possible in precast concrete.
COVERAGE / YIELD : 1.0 – 3.0 litre per 100 kg of total cementitious material.
CORMIX SP1/B
DESCRIPTION : A highly effective water reducing superplasticiser and an extremely powerful de-flocculating agent, it operates by dispersing cement in to its primary particles which dramatically increases the flow characteristics of the cement paste. Complies with ASTM Type A&F and BSEN 934-2.
PRINCIPLE USES : For using both in precast concrete & R.M.C. applications. Uses include to produce flowing concrete in congested areas, slabs and foundations, large pours, beams, columns and precast elements.
COVERAGE / YIELD : 0.5-3.0 litre per 100 kg of total cementitious material.
