POLYURETHANE GELS
Hydrophillic polyurethane gels Contite G600 (CLICK ON ) series replaces dated acrylate gel technologies which are corrosive, 4 part, difficult to use and shrink. Contite G600 can be injected neat or from 1:1 – 1:5 with water
Contite G600 and water has a very low viscosity similar to water giving very high penetrating characteristics flowing with water into cracks fissures and voids expanding and sealing
![Leak tunnel Leak tunnel](https://www.cormix.com/wp-content/uploads/2021/05/Leak-tunnel-500x300.jpg)
![Leak tunnel Leak tunnel](https://www.cormix.com/wp-content/uploads/2021/05/Leak-tunnel-500x300.jpg)
Before
![Injection-tunnel-spitzingsee Injection-tunnel-spitzingsee](https://www.cormix.com/wp-content/uploads/2021/05/Injection-tunnel-spitzingsee-500x300.jpg)
![Injection-tunnel-spitzingsee Injection-tunnel-spitzingsee](https://www.cormix.com/wp-content/uploads/2021/05/Injection-tunnel-spitzingsee-500x300.jpg)
During
![After 500X300 After 500X300](https://www.cormix.com/wp-content/uploads/2021/05/After-500X300.jpg)
![After 500X300 After 500X300](https://www.cormix.com/wp-content/uploads/2021/05/After-500X300.jpg)
After
Polyurethane gels via their affinity with water seal and waterproof forming a permanent waterproof barrier. The product Contite G600 is very easy to use unlike acrylates being one part, is non toxic, non corrosive and environmentally friendly
Our Solutions :
DESIGNATION
DESCRIPTION
PRINCIPLE USES
COVERAGE/YIELD
TDS
Contite G600
A hydrogel injection grout. Used to stop heavy water leakage. Reacts with water over a range of ratios to form elastic foams, rubbery gasket or elastomeric waterproof gel.
Typical areas of use include shutting off water seepage, forming a positive side waterproof membrane with below grade structures injected from the negative side, for reinjectable hoses & soil stabilization, prevention of water leakage in sewerage and drain pipes, ground stabilization, prevention of water leaks through expansion or construction joints.
See data sheet